Bookmark and Share

JAGUAR PROJECT 7 CONCEPT CAR TO MAKE DYNAMIC DEBUT AT GOODWOOD FESTIVAL OF SPEED

At-a-glance

  • Project 7 was created by the team led by Jaguar Director of Design Ian Callum as a one-off design study based on the new 2014 Jaguar F-TYPE
  • Jaguar Project 7 will make a dynamic debut at the 2013 Goodwood Festival of Speed
  • Project 7 is an all-aluminum bodied roadster featuring a Jaguar D-Type inspired fairing, bespoke carbon-fiber aerodynamic components, and a single-seat cockpit
  • Powered by a 5-liter supercharged Jaguar V8 engine with 550hp, Project 7 will reach 60mph in 4.1 seconds and attain a top speed of 186mph
  • Project 7 will be driven at Goodwood by Mike Cross, Chief Engineer, Vehicle Integrity, Jaguar


(MAHWAH, N.J.) – July 9, 2013 – The Jaguar Project 7 concept will make a dynamic debut at the 2013 Goodwood Festival of Speed on July 12. This concept vehicle is based on the 2014 Jaguar F-TYPE, an all-new, two-seat convertible sports car and winner of the 2013 ‘World Car Design of the Year’ award.

“Project 7 is a single-seat sports car based on the F-TYPE, with the kind of racing-inspired form that designers dream about. It has one purpose: to be driven fast and enjoyed. Jaguar sports cars are known for exceptional performance and clean design. Project 7 captures that spirit in its purest form.”
-Ian Callum, Director of Design, Jaguar

Project 7’s name acknowledges Jaguar’s winning of Le Mans seven times between 1951-1990, and its blue paintwork is reminiscent of the victorious Jaguar D-type cars of 1956/1957.

“The overriding dynamic aim when developing the F-TYPE was ensuring connected feel; it’s a true, driver-focused sports car; agile, immediate, fast and, of course, fun. Having achieved that for the road, Project 7 has given us a unique opportunity to go that little bit further. It’s visceral in every sense – its response, its sound and its sheer performance. I’m very much looking forward to driving it at Goodwood.”
-Mike Cross, Chief Engineer, Vehicle Integrity, Jaguar

Project 7 is not a static concept, but a fully-functional, high-performance sports car. The F-TYPE’s rigid all-aluminum architecture provides the perfect starting point, with power supplied by a 550hp supercharged 5-liter Jaguar V8 engine. This power is delivered to the rear wheels through an eight-speed ZF transmission with “Quickshift” technology, and an active electronically controlled limited slip differential. Project 7 also features a free-flow exhaust system with a ceramic finish, 10mm lower ride height and a custom-calibrated spring/damper tune.

“Jaguar’s sporting bloodline and innovative ambition are perfectly embodied by Project 7, both through its sensual design, and its shattering performance. Project 7’s Goodwood debut will provide a great stage to showcase the creativity of our design and engineering teams.”
-Adrian Hallmark, Global Brand Director, Jaguar

Project 7: A story of passion

Under Director of Design, Ian Callum, who constantly challenges his team to push the boundaries of design, Project 7 went from being an experimental sketch by Jaguar designer Cesar Pieri to the track in just four months.

Bringing to bear his love for cars and motorsport, his passion for Jaguar’s heritage, and his familiarity with the F-TYPE, Pieri drew a single-seat sports car with a swooping profile, cut-down windscreen and race-inspired livery.

“When I saw this sketch of a low-screen, single-seat F-TYPE, I felt enthused by it and wanted to take it further. As designers, our very purpose is to disrupt – to turn the norm on its head and see if it still works – and here at Jaguar, we love to push the boundaries. As a team our challenge was to take this gem of an idea, work within the limitations of production feasibility, and create something worthwhile. So I encouraged Cesar and Alister Whelan, Chief Designer, Jaguar, to take it to the next stage and develop a workable concept, and with the support of key departments across the business, Project 7 was born.”
-Ian Callum, Director of Design, Jaguar

Following digital modeling, a clay model of Project 7 was produced. With that signed off, the Jaguar engineering team worked closely with the design team to ensure that the build stayed true to the concept. The F-TYPE’s two key design ‘heartlines’ remain. The most prominent change is the new D-T ype-inspired rear fairing section that incorporates a rollover hoop and swoops down from behind the driver. The convertible top system has been deleted.

Aerodynamic modifications include a carbon-fiber front air splitter, side skirts, large rear diffuser and a fixed rear spoiler with a 14-degree angle of attack, giving Project 7 a low muscular stance. The side louvers and bonnet vents are also carbon-fiber, while the carbon-fiber and aluminum mirrors draw inspiration from those on Jaguar’s C-X16 sports car concept, which inspired the F-TYPE.

The windshield has been lowered, while a new front fascia design incorporates revised air intakes and headlights with gloss black surrounds. The car sits on 20-inch forged-alloy wheels with carbon-fiber inserts.

The cockpit of Project 7 is no less impressive than its exterior. The driver sits in a composite bucket seat, which is 1.2 inches lower than the stock seat, and is gripped by a four-point racing harness. The passenger seat is replaced by a custom fabricated helmet holder, which carries a custom-designed Project 7 helmet in matching blue paint and graphics, secured by its own harness.

The seat and the insides of the doors are finished in a quilted racing-style diamond pattern. There are carbon-fiber inserts on the console and shift lever, and the steering wheel is equipped with machined aluminum paddles.

“When you look at this car, it has got an enormous amount of appeal. It’s just full of desire – you can see that its sole purpose is to be enjoyed. Project 7 is a very special car – not just because it’s a one-off, but because of its purity of purpose. It’s pure Jaguar.”
-Ian Callum, Director of Design, Jaguar

###

JAGUAR PROJECT 7: TECHNICAL SPECIFICATIONS*

ENGINE & TRANSMISSION

 

Engine Capacity (cc)

5000

Cylinders

8

Valves per cylinder

4

Compression ratio

9.5:1

Bore/stroke (mm)

92.5/93.0

Bore/stroke (inches)

3.64/3.66

Transmission

Eight-speed ZF transmission with ‘Quickshift’ technology

PERFORMANCE

 

0-60mph (sec)

4.1

50-75mph (sec)

2.4

Top speed

186 MPH (electronically limited)

Power (HP@rpm)

550@6500

Torque (lb ft@rpm)

502@2500-5500

Wheels

20-inch “Blade” forged-alloy

Tires

Pirelli P Zero 255/30/20 (front) / 295/30/20 (rear)

*ALL FIGURES ARE MANUFACTURER’S ESTIMATES

Editors’ notes

  • Project 7 will be in action on the hill over all three days of the Goodwood Festival of Speed: Friday, July 12, 2013 through Sunday July 14, 2013
  • Other Jaguar models in action on the hill include: XJR, XFR-S and XKR-S GT
  • Jaguar has won Le Mans seven times:

1951

C-Type

Peter Walker, Peter Whitehead

1953

C-Type

Tony Rolt, Duncan Hamilton

1955

D-Type

Mike Hawthorn, Ivor Bueb

1956

D-Type

Ron Flockhart, Ninian Sanderson

1957

D-Type

Ron Flockhart, Ivor Bueb

1988

XJR-9LM

Jan Lammers, Johnny Dumfries, Andy Wallace

1990

XJR-12

John Nielsen, Price Cobb, Martin Brundle

About Jaguar
Jaguar is a premier manufacturer of luxury sedans and sports cars offering unparalleled design with tremendous performance. The company's vision throughout its storied history has been simple: To produce beautiful, fast cars that are desired the world over. Jaguar strives to provide a world class ownership experience to every owner. Today's Jaguar lineup consists of the XJ luxury sedan, XF sports sedan, the XK Coupe and Convertible sports cars and the two-seater F-TYPE. Jaguar designs, engineers and manufactures exclusively in the United Kingdom, at the Castle Bromwich manufacturing plant in the British Midlands. Jaguar is fully engaged with sustainability initiatives and social concerns with continuous involvement in environmental and community programs. For more information visit the official Jaguar website at http://www.jaguarusa.com.

About Jaguar Land Rover
• The United States is one of the leading global markets for both Jaguar and Land Rover
• Jaguar Land Rover employs 25 000 people and sells vehicles in 170 countries around the world
• Jaguar Land Rover has two state of the art engineering and design facilities and three advanced manufacturing plants in the UK
• In the 2012/13 fiscal year, Jaguar Land Rover has reported revenues of $23.8 billion, up 17% year on year ($20.4 billion last year)
• Jaguar Land Rover has test facilities across the USA in the following states: California, Georgia, Illinois, Maryland, Minnesota, New Jersey, Pennsylvania, Tennessee, and Washington D.C.
• Headquartered in Mahwah, New Jersey in the United States, Jaguar Land Rover North America, LLC has offices across the USA and Canada. Jaguar Land Rover has offices in the following locations: California, Georgia, Illinois, Maryland, Minnesota, New Jersey, Pennsylvania, Tennessee, and Washington D.C.
• Jaguar Land Rover is represented by more than 330 independently operated retail outlets in the USA

Contact:

Wayne York Kung
Product Communications Manager
Jaguar Land Rover North America, LLC
201.760.8591
wkung@jaguarlandrover.com

Leah Watkins-Hall
Corporate, Brand & Interactive Communications Manager Jaguar Land Rover North America, LLC
201.760.8578
lwatki40@jaguarlandrover.com

Facebook: interactivejaguar
Twitter: @interactivejag
Youtube: interactivejag

Information about Jaguar North America products is available to consumers at www.jaguarusa.com

Go to www.us.media.jaguar.com or www.interactivejaguar.com
for news releases, high-resolution photographs and broadcast quality video footage